The Best Way to Install Garage Floor Epoxy

garage floor epoxyThere are things that you can do in order to make your garage floor more attractive and the best one is through the application of epoxy floor coating to it. Of course you want to make sure that it is not only appealing, but also highly durable.

Epoxy floorings have been known to give concrete floors clean and elegant look. Aside from that, they can also last for more than 20 years because they are very effective in avoiding abrasions and scuffing.

However, if you decide on applying this kind of floor coating, it is very important that you make sure that the concrete has been cured for a minimum of 30 days if it is new. It should also be free from any kind of moisture ore residue so that the epoxy will not have a hard time adhering to the surface.

If you are wondering how epoxy floor coating prepared and applied, it is basically the same with applying painting. Aside from curing the concrete with the right products, you also have to make sure that the surface is thoroughly cleaned. New concrete usually has dirt and you have to look into it. It should be free from any kind of substance such as grease, wax, oil, or sealers that may have been applied previously. There are times when air can rise in between cement and this is why there are bubbles appearing on its surface. It can be prevented through the use of a primer. Today, three types of epoxy floor coating are available in the market and you have to get to know all of them. Each of them is almost odorless, contains little VOC’s (volatile organic compounds), and are water-based.

1. One part system

This kind of floor epoxy can be used readily and they don’t require any kind of mixing before the application process. They are famously called because they resemble two part systems that can resist chemicals, marks from hot tires, grease, oil, and stains. There are new varieties available today and they are UV-stable. They can prevent chalking when they are applied to driveways or other exterior slabs.

2. Two-component breathable epoxies

One of the problems that we have is that there are some epoxies that can’t solve moisture issues like those slabs that have evaporation rates that reach high levels, but this kind of problem is eliminated by the two-component systems, which can be in just five days time after the concrete has been cured.

3. Fast-setting epoxies

The last type of epoxy differs from the others because it doesn’t follow the 24 hours as the minimum they require in drying and curing that can last for days. This new epoxy can dry in just 20 minutes’ time and it can be cured in just 12 hours.

If you want to install epoxy flooring on your own, you can always do it on your own but if you want it to be done more properly and in less time, you need to get the help of an expert on epoxy flooring. When it comes to choosing the right company, you need to make sure that you check out the references, license, and insurance papers to make sure that you are dealing with the right people.

It can also help if you refer to the reviews that can be found on Angie’s List so you would know who among them are the best ones in the field.

Repair vs Replacement: Which is A Better Choice For Fixing Concrete Driveway Cracks
The Best Tips on How to Maintain Epoxy Flooring