Installing a drainage system in existing concrete can be a tricky process. There are many things to consider, such as the type of drainage system you want to install and the size of the hole you will need to dig. In this blog post, we will walk you through the steps involved in installing a drainage system in existing concrete. We will also provide some tips on how to make the process easier and less time-consuming. So, if you are thinking about installing a drainage system in your yard, read on!
1) Check Gutter Extensions
Before you start digging, make sure that your existing gutters and downspouts are properly extended away from the foundation wall. This will prevent water buildup around the house and help keep your drainage system working efficiently. Also, there are extensions that prevent freezing and clogging of drainage systems. For instance, you can install gutter extensions with rubber seals that will keep debris and ice out of your drainage system. They are also customizable to fit your needs.
2) Measure the Size of the Hole
Once you have checked and extended your existing gutters, you can start measuring the size of the hole you will need to dig for your drainage system. The size of the hole will depend on what type of drainage system you are installing and how much water it needs to handle. Measure carefully and make sure that your hole is deep enough to allow for adequate drainage.
3) Preparing the Hole
After you have measured out the size and depth of your drainage hole, use a shovel or other digging tool to create a trench around it. This will give you an area to place gravel or other materials in order to support your drainage system properly. Make sure that all sides of the hole become level after digging so that there are no gaps between the walls.
4) Installing the Drainage System
Now you can start installing your drainage system. Depending on the type of system you have, there may be different components to assemble. Make sure that each component is installed correctly and securely in order to ensure a long-lasting solution. In addition, make sure that any pipe connections are properly sealed with waterproof sealant and clamps for additional security. This will help prevent leaks or other issues.
5) Finishing Up The Installation
Once everything is connected and assembled, you can begin filling up the hole with gravel or other materials recommended by your manufacturer’s installation guide. This will help provide an even surface and prevent water from pooling around the house. Lastly, cover up any exposed pipes, joints or fittings in order to keep them safe from potential damage caused by lawn mowers, snow plows, and more.
Installing a drainage system in existing concrete can be a challenging process, but with careful planning and the right tools, it can be done. Just make sure that you take all necessary safety precautions while digging and installing your system. If you are unsure of something or need help understanding the installation instructions provided by your manufacturer, reach out to an expert for assistance.