When installing light poles, it is important to have a sturdy base to support their weight. This blog post will show you how to create a concrete base for your light poles. This is a simple process that can be completed in just a few hours.
Drill an excavation
One of the primary things you will need for this project is a drill. You will use the drill to create an excavation in the ground that will be large enough to fit the base of your light pole. The depth and size of the excavation will depend on the size of your light pole as well as the type of light that it needs to support. In this case, outside LEDs will prove to be a good option because these can be easily supported by your base. This can be attributed to the fact that they have a small footprint when compared to other types of light fixtures. Once you have created the excavation, it is time to start creating the base itself.
As soon as you have created the excavation, it is time to pour in the concrete. Make sure to use a level to ensure that the surface is even. You need to do this so that when the pole is placed on top of it, it will not be off-balance. Once this has been done, cover your base with a plastic tarp to prevent water from damaging its surface. This is particularly important if you are installing your light pole outside and there is a rain forecast for that period.
After you have created your excavation and poured concrete, it is time to attach the rebar. The rebar will be used to keep the pole itself secure so that it does not fall over or get knocked down by heavy wind gusts. There are two ways of attaching the rebar and that is either by drilling holes into the base itself or by using bolts that are screwed into the concrete. In this case, you will be drilling holes to keep everything secure and stable. This will also allow you to adjust the height of your light pole at a later date if necessary.
After all of your rebar has been attached, it is time for you to set the light pole itself on top of your new base. To do this, simply slide it down gently into the concrete and make sure that it is facing in the right direction. This may require some help from a friend or two, especially if you are installing an LED light fixture which can sometimes be quite heavy. You also need to keep in mind that this is something that needs to be done very carefully since you do not want your pole falling over at any point during installation. If it does, then you will need to start over from scratch and that means another excavation.
Attach LED light fixture
When everything has been set in place, it is time for you to attach the LED light fixture itself. This can be accomplished by using a drill or screwdriver to install screws into pre-made holes. Make sure that the screws are tight so that there is no chance of them becoming loose over time and causing your light fixture to fall off of the pole.
Once everything has been installed, it is important to test out your new light pole. Do this by turning it on and checking to see if all of the lights are working properly. If they are not, then you will need to troubleshoot the issue to determine what is wrong. More often than not, this will be something that is easily fixed. Otherwise, you may want to consider contacting a professional to take care of the problem. They will be able to do a better job than you at ensuring that your light pole is up and running properly.
This article has shown you how to create a concrete base for your light pole. This is something that can be done fairly easily and without much difficulty, if you follow these instructions carefully. With a sturdy concrete base, you can rest assured that your light pole will be securely installed and able to withstand whatever Mother Nature throws its way. Follow these simple steps and you will be able to create a safe and reliable base for your light pole. Rest assured that you will be able to enjoy the benefits of your new light pole for many years to come.